Sinor PBT-52-12 Repairing Hand Tap 12mm (1/2")

Code: PBT-52-12

Material: Metal 

Size: 12mm (1/2")

Weight: 140gm

Packaging Size: 100mm x 25mm x 25mm

1) Inspection: Examine the hand tap for any visible damage or wear, such as dull cutting edges, bent shanks, or stripped threads.

2) Cutting Edge Sharpening: If the cutting edges are dull or chipped, use a bench grinder or a suitable sharpening tool to carefully sharpen them.

3) Shank Straightening: If the tap has a bent shank, secure it in a vise and gently apply pressure to straighten it out. Be cautious not to overbend or break the tap.

4) Thread Cleaning: Use a wire brush or tap cleaner to remove any debris or residue from the tap's threads. This helps ensure smooth operation during tapping.

5) Thread Restoration: If the threads are stripped or damaged, a thread file can be used to restore them. Apply the file carefully, following the original thread pattern.

6) Re-threading: In more severe cases of thread damage, a tap and die set can be used to re-cut new threads on the tap. Match the appropriate tap size to the existing tap.

7) Lubrication: Apply cutting oil or tapping fluid to the tap before use. This lubricates the cutting edges and helps prevent overheating and premature wear.

8) Proper Technique: Ensure that the tap is properly aligned with the workpiece and apply steady, even pressure while turning. Avoid excessive force that can cause breakage.

9) Cleaning and Storage: After use, clean the tap thoroughly to remove any chips or debris. Dry it completely and store it in a protective case or container to prevent damage.

10 Regular Maintenance: Perform periodic inspections and maintenance on your hand tap, such as cleaning, sharpening, and lubrication, to keep it in good working condition and extend its lifespan.